Renson Endura Delta 330, Инструкция по установке и эксплуатации

Страница: 59 / 140

59
Endura
®
Delta
en
Installer
8.2.3.1 • Installer Settings
The installer can use this menu to change the basic settings for the Endura Delta. We recommend
that users do not change these settings themselves. Always consult your installer. Changing some
of these parameters can have an impact on the correct operation of the Endura Delta. Changes
that are not made by a professional installer are done entirely at your own risk and RENSON
®
is
not responsible for any damages to the unit or poor air quality in the home as a result of incorrect
changes to the Installer settings.
Select “Installer Settings” using
▲
and
▼
, and confirm by tapping
■
.
You will be asked to enter an access code. The code is the last 4 digits
in your unit’s warranty number. You can find the warranty code on the
sticker on the unit itself, or in the User Menu “Settings > My Device >
Device Information > Warranty Number (see 11.1.3.4.1.1).
Change the code using
▲
and
▼
, and confirm each time by tapping
■
.
To exit the menu, briefly tap
▲
and
▼
simultaneously.
If you enter the wrong code, the following screen appears. You can try
to enter the code again or exit the menu by tapping “Cancel”.