Renson Endura Delta 330, Инструкция по установке и эксплуатации, Страница: 124 / 140

124
Endura
®
Delta
en
User
11.1.3.4.1.5 • Day/Night settings
You can change the start time for the day and night periods using this menu. The day and night
periods relate to the “pollution ventilation level”. If the Endura Delta is in automatic mode (see
8.1.2.2), then the system is also demand-controlled.
A humidity and VOC sensor are built into the Endura Delta as standard. If these sensors detect a
disruption in the air conditions (e.g. you take a shower and the humidity rises), then the “pollution
triggered ventilation level” is activated. This ventilation level is maintained until the quality of the
air is back under control.
You can set the intensity of this “pollution triggered ventilation level” yourself for both the day and
night periods. If you want to set the day and night periods, you must follow the steps described
below:
Select “Day/night settings” in the “My device” menu, and confirm by
tapping
■
.
To exit the menu, briefly tap
▲
and
▼
simultaneously.
Select “Start daytime” by tapping
■
and change the time using
▲
and
▼
. Confirm the start hour with
■
.
Select “Start nighttime” by tapping
■
and change the time using
▲
and
▼
. Confirm the start hour with
■
.