Renson Endura Delta 330, Инструкция по установке и эксплуатации

Страница: 129 / 140

129
Endura
®
Delta
en
12 • Maintenance
Always ensure that the unit is turned off and unplugged before starting to service it for
maintenance. Do this by unplugging the power cable from the wall socket or by switching off the
fuse Be sure to measure if the unit is actually turned off and unplugged.
It is recommended to regularly clean and/or replace the filters based on how dirty they get.
Replace the filters every 6 months and clean them every 2 to 3 months.
You will get a filter message on the unit, controller, and smartphone to help you remember to
service the filters for maintenance.
12.1 • Filter message
12.1.1 • App + TouchDisplay
You can change the settings for the filters on the RENSON Ventilation app and the TouchDisplay
yourself via: Settings > My device > Filter. In order to access the menu on the TouchDisplay, see
Section 11.1.3.4.1.2.
• Use the “Reset Filter” function after you have cleaned/replaced the filters. The time interval for
the filter time is then restarted. After this time interval ends, you will receive another message
stating that you need to clean/replace the filters.
• You can set the time interval (expressed in days) at which you want to clean/replace your filters
yourself using the “Set Filter Time” function. We recommend cleaning the filters at least every
3 months and replacing them at least every 6 months.
• The “Time Remaining” function displays how many days are left until the next filter message.
12.1.2 • XVK 4-position switch
When using a XVK 4-position switch, you will receive a visual reminder when you need to
clean/replace the filters. The two upper LEDs on the controller will flash slowly. After cleaning/
replacing the filters, tap the ventilation mode that you wish to reactivate and the filter message
will disappear.
You can change the filter time using the built-in TouchDisplay in the Endura Delta glass panel
according to the steps described in Section 12.1.1.