Renson Endura Delta 330, Инструкция по установке и эксплуатации

Страница: 49 / 140

49
Endura
®
Delta
en
Installer
Register the new unit
The registration menu consists of three parts:
1. Installer information: here
is where the information
about the installer is
entered, such as: company
name, VAT no., installer’s
full name, email address
2. Unit information:
information on the project
for which the unit has been
installed.
3. Installation information:
information about the
measured flow rates per
room (measurement report).
Obviously, the registration must be done after configuring the unit so that you can enter the
measured flow rates per room.
As soon as all of the fields have been completed, you can finish the registration by tapping
“Register now”. Attention! Your unit and smartphone/tablet must be in the same network and this
network must have access to the internet.
If this is not the case, you can temporarily save the registration by tapping
“Save registration”. If you close the app after this and then reopen it when
you are connected to a Wi-Fi network with access to the internet, you will
be automatically asked if you want to send the saved registration file now.
Upon successfully registering, you will receive a confirmation email with
all of the information and a file with the configuration parameters for the
unit.