Renfert 1845 0000, Руководство пользователя

Страница: 27 / 266

en
1 Introduction
1.1 Symbols used
Symbols with the following meanings are used in these instructions or on the equipment:
Danger
Immediate danger of injury. Consult accompanying documents!
Electrical current
Danger due to electrical current.
Danger
Hot surfaces.
Risk of explosion
Opening under pressure could cause parts to be ejected explosively.
Danger
Pressurized hot steam!
Do not open while the unit is hot!
Danger
Danger of injury due to hot liquids or steam.
Caution
Risk of damage to the equipment if the instruction is not followed.
Notice
A general notice that improves and eases use.
The operating instructions are also available in electronic format on our website.
Visit www.renfert.com/p918, and enter the following item number: 18450000 or 18460000.
The product complies with the applicable EU regulations.
Within the EU, the equipment is subject to the provisions of the WEEE Directive.
► List, particular attention should be paid
• List
-Subordinate list
⇒
Instructions / appropriate action / input / operational sequence:
You are asked to carry out the specified action in the order indicated.
♦ Result of an action / response by the equipment / response by the program:
The equipment or program responds as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
2 Safety
2.1 Intended use
This steam cleaning unit is intended exclusively for cleaning dental items�
Do not direct steam at living creatures under any circumstances!
Commercial use only!
2.2 Improper use
Only spare parts and accessories supplied or authorized by Renfert GmbH may be used with this prod-
uct. If other spare parts or accessories are used, this could have a detrimental effect on the safety of the
equipment, increase the risk of serious injury and lead to damage to the environment or the product itself�
Only Renfert descaling solution or descaling solution authorized by Renfert may be used for des-
caling!
Other descaling solutions could damage the pressure tank and mechanical components, quickly
causing complete failure.
- 3 -