Renfert 1804-0000, Руководство пользователя

Страница: 19 / 156

EN
12.2 Electrical connection
• Ensure that the voltage corresponds to the voltage on the rating plate of the unit�
• Plug in the unit�
12.3 Absaugung anschließen
The Millo / Millo pro must be operated with an extractor.
The minimum air flow volume of the extractor must be 2040 l/h.
Attach the extractor hose to the connector on the unit (Fig� 6)�
12.3.1 Option Millo pro
The Millo pro has a plug-in socket�
This plug-in socket has an electrical current when the Millo pro is switched on so that an extractor can be
operated directly with it�
Do not exceed the connected load for the plug-in socket.
The plug-in socket should only be used for connecting an extractor.
Connecting other electrical units to the plug-in socket could damage the Millo pro.
• Plug the extractor into the plug-in socket on the back of the Millo pro (Fig� 7)�
Section 11�1 at the end of these instructions offers information concerning electrical systems employing
different power plug designs�
The Millo / Millo pro is now ready for operation�
13 Operation
13.1 Controls
Millo pro (Fig� 1, 2) / Millo (Fig� 3, 4, 5)
A ON / OFF button
B ON / OFF LED display
C Height adjustment (only Millo pro)
D Connector for extractor
E Plug-in socket for connecting an extractor (only Millo pro)
F Safety cut-out (Millo pro, Fig� 2)
G Fuse links (Millo, Fig� 5)
H Mains cable
13.2 Switching on / off
Switching on the unit:
• Press the ON / OFF button (A, Fig� 1 & 3):
-LED display lights up;
-cutter rotates�
-Only Millo pro:
Electricity is supplied to the plug-in socket and the connected extractor, which is already switched on,
starts�
Switching off the unit:
• Press the ON / OFF button (A, Fig� 1 & 3):
-LED display goes out;
-cutter comes to a stop�
-Only Millo pro:
The electricity supply to the plug-in socket is switched off and the connected extractor comes to a
stop�
- 5 -