Renesas SH7041 Series, Руководство по оборудованию, Страница: 347 / 923

309
12.2.5 Timer Status Register (TSR)
The timer status register (TSR) is an 8-bit register that indicates the status of each channel. The
MTU has five TSR registers, one each for channel. TSR is initialized to H'C0 by a power-on reset
or by standby mode. This register is not initialized by a manual reset.
Channel 0: TSR0:
Bit: 7 6 5 4 3 2 1 0
— — — TCFV TGFD TGFC TGFB TGFA
Initial value: 1 1 0 0 0 0 0 0
R/W: R R R R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
Note:
*
Only 0 writes to clear the flags are possible.
Channels 1, 2: TSR1, TSR2:
Bit: 7 6 5 4 3 2 1 0
TCFD — TCFU TCFV — — TGFB TGFA
Initial value: 1 1 0 0 0 0 0 0
R/W: R R R/(W)
*
R/(W)
*
R R R/(W)
*
R/(W)
*
Note: * Only 0 writes to clear the flags are possible.
Channels 3, 4: TSR3, TSR4:
Bit: 7 6 5 4 3 2 1 0
TCFD — — TCFV TGFD TGFC TGFB TGFA
Initial value: 1 1 0 0 0 0 0 0
R/W: R R R R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
Note:
*
Only 0 writes to clear the flags are possible.
•
Bit 7—Count Direction Flag (TCFD): This status flag indicates the count direction of the
channel 1, 2, 3, 4 TCNT counters.
This bit is reserved in channel 0. This bit always reads as 1. The write value should always be
1.
Bit 7: TCFD Description
0 TCNT counts down
1 TCNT counts up (initial value)
•
Bit 6—Reserved: This bit always reads as 1. The write value should always be 1.