Regulus KPC1-BP, Инструкция по установке и эксплуатации

Страница: 7 / 26

7
│
2.2 Roof anchor installation for sloping roofs
Pay attention to situations when battens are thicker than the auxiliary board (30 mm). Then the auxiliary board
shall be mounted on an underlay so that its total thickness equals to that of the battens (see pic.).
When installing anchors on a rafter, use an underlay as well depending on how thick the battens and counter
battens are, so that the installed anchors do not hinder proper seating of tiles.
40
30
10
30
30
auxiliary board
battens
counter batten
rafter
waterproofing membrane
underlay
Pic. 2: Underlay to match thick battens
Pic. 3: Stainless-steel roof anchor Hot-dipped steel roof anchor Aluminum roof anchor
140−160
290
99
40
79−99
65.5
Ø 6
125
80
65
40
300
100
35
Ø 6
120
80
90
35
300
45
40
Ø 6
2.2.1 Installation with roof anchors and auxiliary boards
• for tile roofs, 3 cm thick additional auxiliary boards shall be mounted to the bottom side of the roof. Then hook
the anchors onto the board and fi x with a bolt.