Regulus KPC1-BP, Инструкция по установке и эксплуатации

Страница: 15 / 26

15
│
• fi x further triangular supports to the rails in the same manner. Always adjust the distance between them in
such a way that the triangular support is positioned approximately under the middle of a collector. If you install
also the wind brace between the supports, tighten only one support. The wind brace will set the right distance
between the supports.
• fi x the wind brace to a triangular support and to the rail (see pic. 19). One wind brace is suf fi cient for one
support structure (up to the rail length of 6.15 m).
Pic. 18: Assembly by means of the travelling screws with a special head
Pic. 19: Fixing the wind brace
24
A
B
13 mm spanner
a b c