4
ENGLISH
NOTE:
The locknut should be on the outside of the coverplate.
Step 4:
After securing both lights to the coverplate for wall mounting, or
to mount the fixture as packed in the eave mounting position,
follow
Wiring your fixture
instructions that follow.
Wiring your fixture
NOTE: This fixture should be mounted to a grounded junction box
(not included).
Step 1: Turn off the power at the main fuse/breaker box.
Step 2:
Install the junction box mounting bracket using 2 of the 6-32 or
8-32 x 1/2” screws, depending upon the screw receptacles in
your junction box.
Step 3:
Position the gasket included on the coverplate and connect the
black wires from both fixtures to the black house supply wire and
the white wires from both fixtures to the white supply wire using
the wire nuts provided. Attach any ground wire coming from your
house to the copper ground wires from both fixtures using wire
nuts provided. If no
house ground wire is
available, attach both
copper ground wires
from the fixture to
the junction box if it
is metal and ground-
ed. If junction box is
not metal and no
house ground wire is
available, an alterna-
tive ground source
must be used for safe operation. (See N for wiring diagram.)
Step 4:
Position the coverplate over the junction box and insert the 1 1/2”
screw included through the center hole in the coverplate and
tighten into the junction box mounting bracket installed in Step
#2. Be sure no loose wires remain sticking out from underneath
the coverplate.
Step 5:
Apply silicone caulk around the edges of the coverplate to pro-
vide a watertight seal from rain and moisture.
Step 6:
Turn on power at main fuse/breaker box.
NOTE: This fixture
can be used with a dimmer switch to adjust light output.
To install a dimmer switch: Use a dimmer switch designed for
incandescent lighting that has a rating of 300 watts or higher.
Follow the installation instructions included with the dimmer
switch.
Keeping the halogen bulb in a dim mode for an
extended period of time may shorten the life of the bulb. To
achieve maximum bulb life, occasionally turn the switch to
full brightness for a few hours.
White house
power wire
House
ground
Lamp fixture
ground
Black house
power wire
White lamp
fixture wires
Black lamp
fixture wires
N
TMQ I. S. 325-0369 6/17/04 2:50 PM Page 4
