Regency GF1500LST-LP, Инструкция для владельца и по установке

Страница: 36 / 64

36
Regency GF1500LST Gas Fireplace
installation
LOG SET INSTALLATION
919-720
10.04.16
LOG SET INSTALLATION
Read the instructions below carefully and refer to the images. If the logs are broken do not use the unit until they are replaced.
Broken logs can interfere with pilot operation.
Improper positioning of the logs may create carbon build-up and can alter the unit's performance which is not covered under warranty.
Log kit # 606-930 contains the following pieces:
1. Log 1 sits in the centre of the burner, line up pin locators on Log
1 with corresponding pins on the burner as shown in Diagram 1.
2 . Facing Side A—position Log 2 on the right side of the Log 1. There are 2
landing spots on the burner to rest Log 2 into, lean the top portion of Log
2 on Log 1.
4. Place Log 4 in the landing spot in the burner, located in between Logs 2
+ 3 as shown in Diagram 4.
3. Place Log 3 diagonally as shown below. The top part of Log 3 will rest
in the landing spot on Log 1 and the bottom portion will rest in a landing
spot in the burner.
Description
1 Log 1-Large Centre Log
1 Log 2- Side A Right Log
1 Log 3- Side A Left Log
1 Log 4- Side A centre Log piece
1 Log 5- Far Right Log Piece
1 Log 6- Side B Left Cross Log
1 Log 7- Side B Front Left Cross Log
1 Log 8- Side B Right Cross Log
1 Log 9- Side B Front Right Cross Log
1 Log 10 - Far Right Log Piece
5 Ember Pieces
Diagram 1
1
Diagram 3
Diagram 2
Diagram 4
2
3
2
4
3
10
1
6
7
8
9
5
4
Side A
Side B
Vent located
this end
1
GF1500LST