Regency GF1500LST-LP, Инструкция для владельца и по установке

Страница: 21 / 64

Regency GF1500LST Gas Fireplace
21
installation
RIGID PIPE FLUEING SYSTEMS
BASIC HORIZONTAL & VERTICAL TERMINATIONS
Rigid Pipe Flue Systems offer a complete line of
component parts for installation of both horizontal
and vertical installations. Many items are offered
in decorative black, as well as galvanized finish.
The minimum components required for a basic
Horizontal Termination are:
1 AstroCap XL Termination Cap
1 90 degree Elbow
1 Rigid Pipe Adaptor
(Dura Vent Only)
1 Wall Thimble
1 Length of rigid pipe to suit wall thickness
The minimum components required for a basic
Vertical Termination are:
1 Vertical Termination Cap
1 Rigid Pipe Adaptor
(Dura Vent Only)
1 Lengths of pipe to adequately
penetrate roof
1 Flashing (As required per AS/NZS
5601, to be supplied by installer)
Wall thickness is measured from the back standoffs
to the inside mounting surface of termination cap.
For siding other than vinyl furring strips may be
used, instead of the vinyl siding standoff, to create
a level surface to mount the vent terminal. The
Terminal must not be recessed into wall cladding.
Measure the wall thickness including wall cladding.
WARNING:
Do not combine flueing components from
different venting systems.
Exception: However, use of the the AstroCap
XL
TM
is acceptable with all systems.
When using Rigid Flue other than
Simpson Dura-Vent, 3 screws must be
used to secure rigid pipe to unit.
AstroCap XL
Rigid Pipe Adapter
PipeLength
VerticalTerminal
Flashing
Pipe
Length
PipeLength
90̊ Elbow
TerminationCap
(Part#946-623/P)
WallThimble
(Mandatoryinall
HorizontalTerminations)
(Part#946-506/P)
Flue Guard - Optional
-Not Supplied
(Use only with Simpson Dura Vent)
Not required when using Flo-met pipes (vertical only)