Regan Scientific Instruments BOT-3000E, Руководство по эксплуатации

Страница: 4 / 29

2
SAFETY AND CARE
Personal Protective Equipment (PPE)

Latex or nitrile gloves should be worn to protect hands from
repeated exposure to surfactant solution.

A dust filter mask should be worn when sanding sensor
materials.
The following precautions, coupled with prudence and general
common sense, will help avoid damage to the device as well as
potential injury to you or others in the general vicinity:

Keep the tribometer clean, calibrated, and properly
maintained. Never open the tribometer or the battery case.

Use cones, flags or distinct barriers to prevent people from
walking into your test area and possibly slipping or tripping
on test equipment and testing items.

Immediately wipe up any wet testing spots once testing has
been completed in that area. Never leave a wet testing spot
or spill unattended!

Do not operate the device in the immediate vicinity of
motorized vehicles such as forklifts or other motor vehicles.

Do not allow the device to run into objects or people.

Do not operate near flammable gasses or liquids.

Keep hands and feet clear of the unit once a test run has
been initiated.

Do not allow liquids or dust contamination to enter the
bottom opening of the unit.

Battery pack charging should take place in an open area free
from excessive dust or flammable gasses or liquids.

Battery packs should never be stored where metallic objects
or liquids could come in contact with the connection interface
or they could potentially short circuit and catch fire.

The tribometer or any of the included accessories must not
be modified except by Regan Scientific Instruments Inc. (the
manufacturer.)