Regan Scientific Instruments BOT-3000E, Руководство по эксплуатации

Страница: 9 / 29

7
4. Press the DCOF or SCOF switch according to the desired
test type (Fig. 2).
5. In DCOF mode, you may select
“SINGLE” to perform one
test, otherwise select one of the Standard Test Methods
(Fig. 3).
USER TIP; It is often helpful to first perform a single pre-test
run which will help acclimate the sensor material to the surface
being tested.
Figure 3
6. Use the navigation switches (arrows, + and -) to adjust the
test run distance (DCOF ONLY), area, and location codes.
7.
Press the “GO” switch to begin testing (Fig 4). The unit will
emit a beep alert, lower the sensor, and then move
forward.
CAUTION: To protect the internal mechanism, do
not lift or move the instrument from the test surface until
the beep alert stops!