Regan Scientific Instruments BOT-3000E, Руководство по эксплуатации

Страница: 17 / 29

15
DEVICE MAINTENANCE
The BOT-3000E requires a minimum amount of maintenance as a
function of design, however there are several items that should be
noted:
BATTERIES:

Battery packs should never be transported or stored where
metallic objects or liquids may contact the connection interface
or it could arc and ignite any surrounding material.

Leaving a battery pack inside the device or the charger when
not in use will drain the pack to an unusable state.

Battery packs should be maintained on a rotating charging
schedule to prevent premature failure.

Battery pack charging should take place in an open area free
from excessive heat, dust, and flammable gasses or liquids.

Batteries may become quite warm during charging, and must
be allowed to cool completely before using.
WHEELS:

Wheels may be removed for cleaning by pushing the hub
inward and turning 90 degrees. The wheel should now be
easily separated from the axle. The wheels should be cleaned
with isopropyl alcohol, using a toothbrush, followed by a clean
water rinse. Dry wheels completely before reinstallation.
CALIBRATION:

The user may not calibrate the device; it MUST be returned
to Regan Scientific Instruments to receive an authorized
factory calibration on a specially designed calibration fixture.

The device will indicate the last calibration date with the
printed test results. The calibration cycle is on an annual
basis, regardless of the usage amount. Please make note of