Reflex Servitec 30 Mobil, Руководство по эксплуатации

Страница: 44 / 53

Maintenance
44 — English Vacuum spray degassing — 03.11.2014
9 Maintenance
Caution – risk of burning!
• Excessive surface temperatures in heating systems can cause skin to burn.
– Wait until surfaces have cooled down or wear protective gloves.
– The operator is required to attach corresponding warning notes in the device vicinity.
Caution – risk of injury!
• If installation, removal or maintenance work is not carried out correctly, there is a risk of burns and other injuries at
the connection points, if pressurised hot water or hot steam suddenly escapes.
– Ensure proper installation, removal or maintenance work.
– Ensure that the system is de-pressurised before performing installation, removal or maintenance work at the
connection points.
Caution – risk of injury!
• Bodily harm from a toppling device.
– Ensure sufficient stability of the device.
– Weigh down the bearing surface of the device's transport unit with suitable means.
Perform device maintenance at least once each year or after every deployment in a facility system.
The cleaning intervals depend on the operational conditions in the facility system.
Do not exceed the following recommended values:
• Continuous
degassing time.
– The continued degassing time depends on the "Va" system volume, see chapter 5 "Technical data" on page 15 .
• Interval degassing.
– The setting values are stored in the Service menu.
The controller displays the annual maintenance due upon expiry of the set operating time.
•
Use "Quit" to acknowledge the "Maintenance recommended" message.
Note!
Maintenance work must be carried out and confirmed by specialist personnel or the Reflex Customer Service.