Reflex Servitec 30 Mobil, Руководство по эксплуатации

Страница: 43 / 53

Operation
Vacuum spray degassing — 03.11.2014 English — 43
ER Code Alarm Floating contact Cause Remedy Alarm reset
19
Stop
˃
4 hours
- Device is in stop mode for
more than 4 hours.
Set the controller to
Automatic mode.
-
20 Maximum make-
up quantity
- Set value exceeded. Reset the "Make-up
quantity" meter in the
Customer menu.
Quit
21 Maintenance
recommended
- Set value exceeded. Carry out maintenance. Quit
24 Softening - • Set value for soft water
capacity exceeded.
• Time interval for
replacement of the
softening cartridge
exceeded.
Replace the softening
cartridges.
Quit
30 I/O module fault - • I/O module defective.
• Connection between
option card and
controller faulty.
• Option card defective.
• Replace the I/O
module.
• Check the connection
between option card
and controller.
• Replace the option
card.
-
31 EEPROM defective Yes • EEPROM defective.
• Internal calculation error.
Contact the Reflex
Customer Service.
Quit
32 Undervoltage Yes Supply voltage not achieved. Check power supply. -
33 Adjustment
parameter faulty
- EPROM parameter memory
defective.
Contact the Reflex
Customer Service.
Quit
34 Main board
communication
faulty
- • Connecting cable
defective.
• Main board defective.
Contact the Reflex
Customer Service.
Quit
35 Digital input
voltage faulty
- Short-circuit of input voltage. Check the wiring at the
digital inputs (water
meter, for example).
-
36 Analogue input
voltage faulty
- Short-circuit of input voltage. Check the wiring at the
analogue inputs
(pressure/level).
-
37 No input voltage
at the 3-ways
motor ball valve
- Short-circuit of input voltage. Check the wiring at the 3-
ways motor ball valve.
-