Redvision VEGA 2010-PW, Руководство по установке

Страница: 28 / 30

Vega 2010-PW Installation Guide Version 1.5 June 2019
28
©Redvision CCTV Ltd. 2018 Content subject to change without prior notification. All rights reserved.
5.60 User pass-through connections
The CHAT™ board provides two 8 -way connector blocks, located on the top of the board; these are voltage-free, and have no
direct connection to the CHAT™ board. They are simple pass-through connectors, to allow easy routing and management of
user cables. Each pin on the left-hand connector links to the same pin on the right-hand connector; 1-1, 2-2, 3-3 etc. These can
be used for linking alarm, audio, or other auxiliary wires as required.
5.61 Refitting the Housing cover
•
Once connection and final testing is complete; re-fit the top cover using the 3x 6mm Allen screws, then fasten the 2x
4mm Allen screws on the front bezel; ensuring the gasket seal, cover and bezel are fitted flush and evenly all round.
Your Vega™ 2010 -PW housing is now ready to use.
Take care to ensure that the earth strap is not trapped when refitting the housing cover.
8 8
1
1
Fig 23 JP6 Aux control connections