Redvision VEGA 2010-PW, Руководство по установке

Страница: 5 / 30

Vega 2010-PW Installation Guide Version 1.5 June 2019
5
©Redvision CCTV Ltd. 2018 Content subject to change without prior notification. All rights reserved.
1.3 Safety
1. Installation of this system should be carried out by suitably trained and qualified technicians in accordance with
local electrical codes.
2.
To prevent the risk of electric shock do not expose the electrical connectors on the camera or the inside of the
control box to water before or during installation. Condensation/ misting may occur if water is allowed to enter
the housing before power is applied.
3.
Do not drop the product.
4.
Avoid the use of alcohol or solvent-based cleaners. The product should be cleaned with clean water and non-
abrasive material.
5. The camera system should be installed where it cannot be tampered with by unauthorised personnel.
6. The products should be securely fastened to a structure of sufficient strength to support it. Allowance should be
made for additional loads caused by local wind effects.
7. This product incorporates an automatic heating element; located underneath the housing window. This element
will become very hot, touching the element could result in burns or injury. Avoid contact with the heating
element!
THIS CAMERA SYSTEM MUST BE INSTALLED, OPERATED AND MAINTAINED
IN ACCORDA NCE WITH THE MANUFACTURER’S SPECIFICATIONS.