Redvision VEGA 2010-PW, Руководство по установке

Страница: 12 / 30

Vega 2010-PW Installation Guide Version 1.5 June 2019
12
©Redvision CCTV Ltd. 2018 Content subject to change without prior notification. All rights reserved.
3.3 PED mount: fitting instructions
The PED mount is an alternative mounting system, designed to replace the standard wall bracket assembly. The PED is designed
to mount the VEGA™ housing to poles and towers using a 4” PCD fitting. The PED attaches to the housing Pivot Ball in the same
way as the wall bracket; with the same cable access. Removal is the same process as described in section 3.2, Fig 3.
•
To tighten the lock ring in the PED, first remove the PED column cover, by removing the Allen screw as shown in Fig 10
below. Tighten using the optional wrench bar (Fig 11).
•
Fix, pass the cable(s) through; attach the housing body; position the housing and tighten the lock ring as described in
section 3.2, figs 8 & 9.
Fig 10
Remove the Cover retaining screw
Fig 11