Redline Communications AN-50e, Руководство пользователя

Страница: 92 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 92 of 100
Configuration and Parameter Query
Table 40
:
CLI - Configuration and Parameter Query
Command Description
activate <id> Activates the ID.
The ID configuration must be finished before the
activation.
clear <idtable> Clears the ID database
del <id> Deletes the ID: <id>
get <parameter name> [<id>] Displays the value of a configuration or status
parameter
new conn Creates a new connection ID
new group Creates a new group ID
new link Creates a new link ID
passwd <username>
<newpassword> Changes password for user <username>
save <config> Permanently saves system configuration settings
save <snmp> Saves SNMP settings in nonvolatile memory
save idtable Permanently saves the configured IDs
set <parameter name> [<id>]
[<value>] Sets one configuration parameter. If <id> is present,
this is a link configuration, otherwise system
configuration. If <value> is unspecified, shows the
actual value.
show config [<id>] Displays configuration details for the specified ID
show conns [id] Displays the list of connections for a link or a group.
The type of [id] parameter (link or group) determines if
the displayed connections are associated with a link id
or a group id.
show groups [start id] Displays 16 entries from groups table starting with
[start id]
show links [start id] Displays 16 entries from links table starting with [start
id]
show log Displays system messages
show stats [<id>] Displays status and statistics
snmpaccess <community
name> <access> Modifies access rights for a community (see
snmpcomm)
snmpcomm add <community
name> <access> Adds a new SNMP community <access> can be any
combination of: "r","w","t".
snmpcomm del <community
name> Deletes the <community name> SNMP community
snmptrap add <community
name> <ip dest> Sets trap destinations for a community
snmptrap del <community
name> <ip dest> Deletes trap destinations for a community
test <config> Test configuration settings for 5 minutes, after which
the system reverts to the previously saved settings. To
make settings permanent, use the 'save' command.