Redline Communications AN-50e, Руководство пользователя

Страница: 37 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 37 of 100
General
System Name : Enter the name for this terminal. The name can be any
combination of up to 20 letters and numbers. Use the drop-down menu to select
between the two
System Details : Enter additional descriptive details about this terminal. The
description can be any combination of up to 20 letters and numbers.
Software Version : Select the version of system software to load at reset. The
system includes memory to hold two independent system software images. See
Upload Software Section 3.7: for additional details.
Mode : The system designated as master establishes and manages the bi-directional
data link with a subscriber system. The subscriber system receives and sends data
under the control of the master system.
PTP Master : Set this terminal to operate as the master system on a PTP link.
Each PTP link is comprised of one master system and one subscriber system.
PTP Slave : Set this terminal to operate as the subscriber system on a PTP link.
PMP Master : Set this terminal to operate as the master on a PMP link. Each
PMP link is comprised of a sector controller and one of more subscriber
systems.
PMP Slave : Set this terminal to operate as a subscriber system on a PMP link.
Alignment Mode : Select the mode to use when aligning the system antenna. Only
one of the alignment functions is enabled at any time (i.e., selecting Voltage
disables the audible alignment buzzer).
PMP:
Voltage : Enable the voltage alignment pin on the transceiver (if equipped).
Buzzer : Enable the audible alignment buzzer on the transceiver.
PTP:
Check this box to enable the audible alignment buzzer on the transceiver.
Uncheck this box to enable the voltage alignment pin on the transceiver (if
equipped).
Options Key : Displays the user-entered system options key. The options key
controls the availability of functions and default settings on the AN-50e. This
includes maximum Tx power levels and the DFS function. The key is personalized
to each terminal's MAC address. Please ensure that the correct MAC address is
provided when requesting a key from your local representative. Enter the key (case
sensitive), ensure it is correct, and click the Activate button.
IP
IP Address : Enter the IP address for this terminal.
IP Subnet Mask : Enter the IP subnet mask.
Gateway : Enter the IP address of the default gateway on the Ethernet segment.