Redline Communications AN-50e, Руководство пользователя

Страница: 13 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 13 of 100
1.7 R&TTE Directive 1999/5/EC Statements
Installation
The transceiver and antenna equipment must be installed by a qualified
professional installer and must be installed in compliance with regional, national,
and local regulations. It is the responsibility of the system installer and/or system
operator to ensure the installed system does not exceed any operational constraints
identified by local regulations.
Refer to the sections in this product User Guide for detailed information about the
correct installation steps to ensure power and frequency settings are set correctly before
connecting the antenna.
5.4 GHz Systems
Redline Communications Inc. wireless systems comply with the essential requirements
of the Directive 1999/5/EC. This product may be used in all EU countries (and other
countries following the EU directive 1999/5/EC) that have implemented nationally
the appropriate ECC Decision
1
to harmonize use of the 5.4 GHz frequency band.
Not all countries have allowed access to the frequency band and system installers
should be aware of the regulations for any specific country prior to installation.
With respect to the R&TTE directive, a table showing the countries that currently
allow access to this spectrum, is included in this section of the user manual.
The ECC Decision states, in part, that the maximum output power of the system must
not exceed an EIRP level of 30 dBm. Any use of a combination of output power and
antenna resulting in an EIRP level above 30 dBm is illegal and is outside the scope of
the Redline Communications Inc. Directive 1999/5/EC compliance declaration.
5.8 GHz Systems
Redline Communications Inc. wireless systems comply with the essential requirements
of the Directive 1999/5/EC. This product may be used in all EU countries(and other
countries following the EU directive 1999/5/EC) that have implemented nationally
a decision to allow use of the 5.8 GHz frequency band. Not all countries have
allowed access to the frequency band and system installers should be aware of the
regulations for any specific country prior to installation. With respect to the
R&TTE directive, a table showing the countries that currently allow access to this
spectrum, is included in this section of the user manual.
National Interface documents may identify, among other parameters, a maximum
output power for the system, expressed in terms of an EIRP level that must not be
exceeded. Any use of a combination of output power and antenna resulting in an EIRP
level above the national limit may be considered illegal and is outside the scope of the
Redline Communications Inc. Directive 1999/5/EC compliance declaration.
1
ECC/DEC/(04)08 ” ECC Decision of 12 November 2004 on the harmonised use of the 5 GHz frequency
bands for the implementation of Wireless Access Systems including Radio Local Area Networks
(WAS/RLANs)” can be found at
www.ero.dk