Redline Communications AN-50e, Руководство пользователя

Страница: 33 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 33 of 100
3.3.2 PTP System Status
Click System Status in the menu to view system, Ethernet, and wireless interface
statistics. The following screen appears only in PTP version 1.XX.
General information
System Name : Displays the user-assigned system name.
Software Version : (see System Information screen)
RF Link Established : Status for the wireless link connection.
Yes - RF link has been successfully established with the remote-end terminal.
No - RF link has not been established with the remote-end terminal.
Uncoded Burst Rate : The current uncoded burst rate for the link.
Master Mode : Displays if the system operation mode is set to Master.
RF Channel Frequency : Current channel selection.
Tx Power : Transmit power level.
Cable Attenuation : Displays the measured attenuation of the 800 MHz signal
over the IF cable.
Link Distance [Miles or Km] : Distance between master and slave systems.
RF Status [Error Code] : An error code indicating the condition of the system RF
components. See Table 27 : Diag. - RF Status Error Codes on page 74 for details.
Ethernet MAC Address : System hardware address.