Redline Communications AN-50e, Руководство пользователя

Страница: 78 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 78 of 100
5.6 Replacing System Fuse
IMPORTANT: Always completely remove power from the system before
performing any maintenance on the terminal or transceiver.
Warning to service personnel :
Caution for all AC and DC models – Double pole/neutral fusing.
To replace fuse:
1. Disconnect power from the terminal.
1. Pry off the black plastic cover located on the back panel beside the power
switch and extract the red fuse holder.
2. Use an approved tool to remove the glass-cased fuses from the holder.
Be certain to replace the fuse(s) into the lower half of the holder, as shown in
the diagram below. The fuse holder holds two fuses, both of which are active.
Be certain to use fuses of the same type and rating.
Note space
Figure 32
:
Diag. - Fuse Holder
3. Replace the fuse holder in the system terminal and secure.
4. Restore power to the system.