Redline Communications AN-50e, Руководство пользователя

Страница: 70 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 70 of 100
4.6.3 Setting Up a Management Group
The following diagram illustrates a tagged management configuration with two
network management system (NMS) sites. In this setup, a single VLAN is used to
control the AN-50/AN-50e wireless equipment and other user equipment.
Figure 31
:
Op. Notes - Tagged Management Configuration
Over-the-air management is possible only after a group and connections are
configured to transport the VLAN management traffic. In this example all
management traffic is carried on VID=100. First, a tagged group is created with
the Group VLAN ID field set to 100. Tagged connections for links L-1 and L-2 are
added to this group. Uplink and downlink CIR values must be set to ensure the
management traffic has adequate priority.
Table 23
:
Op. Notes - Tagged Management Configuration Settings
Group Configuration
(sector controller)
Connection Configuration
(subscriber station)
Group
Name
Port
Tagging
Group
VID
Connection
Name
Port
Tagging
Connection
VID
Link Group
M1 Tagged 100 SS-1-Mgmt Tagged 100 [L-1] [M1]
SS-2-Mgmt Tagged 100 [L-2] [M1]