background image

 

 

2

FOREWORD 

 

Congratulations with the purchase of your Vibra-Sandmaster. This manual must be read carefully in 
order to ensure safe and long-term operation of this Vibra-Sandmaster. Safe operation of this machine 
is not possible if the user is not fully familiar with the contents of this manual. 
The Vibra-Sandmaster is not a stand-alone machine. It is the responsibility of the user to use the 
correct tractor. The user also has to perform safety-related checks on the tractor / Vibra-Sandmaster 
combination including sound level, user instructions and risk analysis. 
The Vibra-Sandmaster is solely intended for use on fields or other areas where grass can grow. 
The general safety instructions will be covered on the next page. All users must be familiar with and 
apply these instructions. There is a registration card below, which must be sent back in order to 
process any future claims. 
 
This user manual contains numerous instructions, which are numbered in sequence. This working 

sequence must be adhered to. The 

 pictogram indicates safety instructions. The 

pictogram 

indicates a tip and/or note. 
 
All information and technical specifications used are the most recent at the time of publication. Design 
specifications are subject to change without notice.  
 
This document is a translation of the original user manual. 
The original user manual (Dutch language) is available on request. 
 

WARRANTY CONDITIONS 

 
THIS VIBRA-SANDMASTER IS SUPPLIED WITH A WARRANTY FOR DEFECTS IN MATERIALS. 
THIS WARRANTY IS VALID FOR A PERIOD OF 12 MONTHS FROM THE DATE OF PURCHASE. 
VIBRA-SANDMASTER WARRANTIES ARE SUBJECT TO THE “GENERAL CONDITIONS FOR 
SUPPLY OF PLANT AND MACHINERY FOR EXPORT, NUMBER 188”, WHICH WERE PUBLISHED 
UNDER THE AUSPICES OF THE UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE. 
 

REGISTRATION CARD 

 
Complete the table below for your own records: 

 
Machine serial number 

 

 
Dealer name 

 

 
Purchase date 

 

 
Comments 

 
 
 
 
 

Содержание Vibra-Sandmaster 1600



























Отзывы: