Redexim Vibra-Sandmaster 1600, Руководство пользователя и каталог запчастей

Страница: 26 / 26

26
14.3 RETENSIONING THE CONVEYOR
Fig.15
If the conveyor of the hopper starts slipping and does not transport the material properly, it needs
retensioning.
The procedure is as follows:
(see Fig.11)
!! Ensure that the Vibra-Sandmaster is stable on the floor and that it cannot subside or
slide !!
1. Unscrew the nuts 1.
2. Adjust the roller by tightening or loosening the nuts 1.
3. Adjust the roller on the other side of the hopper by the same margin.
4. If the correct tension has been reached, firmly tighten the nuts 1 again.
5. Switch on the conveyor and check whether it runs smoothly and centred.
Readjust the conveyor, if so required.
!! Overtension in the conveyor will shorten its lifespan !!