Redexim Vibra-Sandmaster 1600, Руководство пользователя и каталог запчастей

Страница: 3 / 26

3
!
SAFETY INSTRUCTIONS
!
Fig. 1
The Vibra-Sandmaster
is designed for safe use. This is
only possible if the safety instructions defined in this
manual are observed in full.
Read and understand
(Fig. 1)
the manual before
proceeding to use the Vibra-Sandmaster.
Failure to use the machine as described in the manual
can result in injury and/or damage to the Vibra-
Sandmaster.
(1) The Vibra-Sandmaster is solely intended for use on fields or other areas where grass
can grow.
The manufacturer accepts no liability whatsoever for incompetent use and any damage arising
from this; the user bears full responsibility for all risks arising from this.
The prompt and correct execution of the user, maintenance and repair instructions prescribed by
the manufacturer also constitutes competent use.
Inspect the area for treatment prior to using the Vibra-Sandmaster.
Remove any free-standing obstacles and avoid irregularities.
(2) The Vibra-Sandmaster has been manufactured in accordance with the latest
technological knowledge and is safe for use.
There is a risk of injury for the user and third parties if the machine is operated, maintained or
repaired by improper persons.
This must be avoided!
Always use the Vibra-Sandmaster in combination with the correct tractor, as defined in the
technical data.
(3) All persons appointed by the owner as authorised to operate, perform maintenance on or repair
the Vibra-Sandmaster must have read and fully understood the content of the operation manual
and the Safety guidelines section in particular.
The user is responsible for a
safe Tractor / Vibra-Sandmaster combination. The system as a
whole must be tested for sound, safety, risk and ease of use. User instructions must also be
drawn up.
(4) The user has an
obligation to check the Vibra-Sandmaster for visible damage and defects
before use .
Changes to the Vibra-Sandmaster (including the operation) that are detrimental to safety must be
rectified immediately.
For safety-based reasons, adapting or adding to the Vibra-Sandmaster
(with the exception of
factory approved changes) is not permitted as a rule.
Modifications
to the Vibra-Sandmaster will render the current CE marking ineffective and the
person who performed the modifications is responsible for arranging new CE marking .
Check the Vibra-Sandmaster for loose bolts / nuts / parts prior to each use.
Regularly check any hydraulic hoses and replace these if damaged or show signs of ageing. The
replacement hoses must meet the manufacturer’s technical requirements.
If present, the hydraulic system must be depressurised
at all times before performing any
activities on it.