Redexim Vibra-Sandmaster 1600, Руководство пользователя и каталог запчастей

Страница: 11 / 26

11
4.0 LINKING UP THE VIBRA-MASTER WITH THE VERTI-QUAKE
(See Fig.7)
For a more extensive description of the position and specification of the parts,
see the parts manual.
For the pre-installation of the Verti-Quake please reer to the Verti-Quake
manual.
1.
Fit the side plates 1 to the Verti-Quake.
2.
Remove rear roller 2 of the Verti-Quake.
3.
Remove one of the gas struds 21 wich hold the skids. (too heavy to push it down now)
4.
Connect the Verti-Quake to the tractor by means of the 3-point connection (see the Verti-
Quake manual for the procedure).
5.
Remove the bolts 3 from the Vibra-Sandmaster.
6.
Lift the Verti-Quake and carefully ride the between the coupling plates of the Vibra-
Sandmaster and lift it in the grooves 4.
7.
Rotate the top rod of the tractor so that the bolts 3 can be fitted and secure them with the
corresponding nuts.
Ensure that the locking pins are properly fitted and secured with the clips.
8.
Support the Verti-Quake at the front 16.
Ensure that the Verti-Quake is properly supported, that the support can carry
the load of the machine and that the unit as a whole is stable before continuing
to the next step.
9.
Disconnect the Verti-Quake from the tractor (see the Verti-Quake manual for the procedure).
10.
Mount gearbox 6 and connect it to the enclosed PTO axle 7 (unsecured) between gearboxes
6 and 8.
11.
Fit the short PTO with cam coupling 9, with the coupling side to the Verti-Quake side.
12.
Fit the short PTO 10 to gearbox 6.
13.
Connect the PTO axles to gearbox 11 and connect plate 20 to the filler bush, bolt and nut 18
at the top holes of the lowest three-point suspension of the Verti-Quake.
14.
Fit towing hook 12 to the lowest holes of the lowest three-point suspension of the Verti-Quake
by means of the enclosed three-point pins 19 and secure them with the corresponding clips.
15.
Rotate the supports 15 of towing hook 12 downwards.
16.
Fit the hydraulic top rod 13 with blocking system 14 and secure the pins with the
corresponding clips (see the parts manual for the order of the rings and pins).
17.
Rotate support 15 downwards so that supports 17 can be removed and fit them to the side of
the hopper.