7
www.redbacklasers.com.au
Turning Laser On
Press Power button on the laser’s keypad to turn on the DGL1010VS.
Batteries are low if power bar on the LCD panel is showing low. After turning
the laser on, the laser will auto level and rotate. Note that the power button
on the remote only operates the remote and not the laser. The DGL1010VS
has a massive self levelling range, in other words the body of the laser can
be set up on the tripod along way out of level and the electronic mechanism
will self level the rotating head to be level. If the body of the laser is set up
outside of this self levelling range the laser will emit a continuous beeping
sound. Turn off the laser and re-set the body of the laser more level and
turn on again.
Tilt Mode
Tilt mode is somewhat similar to tilt on a pinball table in that if when running
the DGL1010VS detects significant disturbance or movement that could alter
the accuracy of your work the laser will “Tilt” (stop working) and the laser
beams and the word “TILT” on the LCD screen will flash.
Tilt mode automatically activates after 30 seconds of laser operation. To
turn the tilt feature off use the “tilt” button on either the keypad or the
remote control. The word “TILT” will come up on both LCD screens when
activated.
If during operating the laser “tilts” then you will need to re level the laser by
pressing the level button on the remote or keypad, wait a few seconds
for it to level and then re-check your work to maintain maximum accuracy.
It is recommended to use tilt mode when optimal accuracy is required or
when there is a chance that machinery or worker may interfere inadvertently
with the lasers level.
Содержание DGL1010VS
Страница 1: ......
