13
www.redbacklasers.com.au
Laser Receiver LR715
standard issue
(refer to diagram page 5)
The LR715 is a heavy duty dual sided display rotating laser receiver, it can be
either hand held or with the staff bracket clamped onto a staff. The bubble
vials can be used to keep the receiver level.
•
A press of the power button toggles the receiver on and off.
•
The Speaker button toggles through 3 speaker volumes.
•
Pressing the Coarse/Fine Mode button toggles through 3 levels,
the first being fine mode indicated by on the LCD, the accuracy
of level is at its highest with 1mm tolerance movement by the receiver
before showing off level. The next coarser mode allows 2mm
before showing off level the third press shows no symbol on the LCD
and allows 3mm before showing off level, these two coarser modes are
more suitable for general site levelling.
•
The Back Light button toggles the LCD display back light.
The LR715 has two large LCD displays with progressive bars indicating when
the laser gets closer to the level mark. Move the receiver up and down slowly
and watch the display change when the solid tone is heard and the centre
line is shown then the receiver is at the height of the laser beam plane. The
receiver will auto power down after 10 minutes when not receiving laser
pulses. Note receivers do not work in Scan mode.
RECEIVER INSTRUCTIONS
Indicates laser beam is below
line - slide receiver down.
Indicates laser beam is above
line - slide receiver up.
Indicates laser beam is on the
line.
Power and Battery Life Indicator
Coarse/Fine and Speaker Indicator
DGL1010VS OPERATING INSTRUCTIONS
The DGL1010VS sold as a standard package includes the RedBack LR715
receiver. The DGL1010VSR720P special package includes the LR720 receiver.
Содержание DGL1010VS
Страница 1: ......
