RedBack Lasers DGL1010VS, Инструкция по эксплуатации

Страница: 6 / 16

6
www.redbacklasers.com.au
DGL1010VS OPERATING INSTRUCTIONS
Battery Instructions
To charge this battery pack simply inserting the charger plug into the charging
socket found on the hinged battery compartment cover. You can also charge
the Li-ion pack without it inserted into the laser itself utilising the charging
socket on the battery pack. The charger LED is illuminated red during the
charging process and will turn green once the batteries are fully charged.
When the power symbol on the laser levels LCD shows low, the rechargeable
battery needs recharging or standard batteries need replacing. Note the
charger will only charge the supplied rechargeable battery pack. The battery
symbol on the remote control LCD indicates the power level of the remotes
batteries.
Handy Hints
• Prior to initial use, charge the rechargeable batteries for at least 8
hours.
•
Running rechargeable batteries completely flat will increase battery life.
•
The DGL1010VS can operate off mains by plugging the charger (for
indoor use only) into the unit when re-chargeable pack is inserted.
• Remember the DGL1010VS can operate using standard batteries when
rechargeable pack is out of charge.
•
The rechargeable pack can be charged either when inserted into the
laser or separate to it.
The DGL1010VS has two battery options either 3 x standard “D” size Alkaline
or the Li-ion rechargeable pack. For standard 3 x “D” alkaline operation
simply insert into the standard battery caddy in the direction indicated, insert
caddy into recess and tighten the locking screw.
To use the rechargeable battery
pack first remove standard
batteries if inserted and place
rechargeable pack into the
same battery recess, tightening
locking screw.