RED SCARLET-W Series Скачать руководство пользователя

Страница: 53 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 53

TC INDICATOR

The TC indicator shows the current timecode status.

Grey

: No analog timecode is detected.

Red

: Analog timecode is detected but not enabled.

Green

: Analog timecode is used to jam the time of day timecode.

For more information, go to

“Timecode, Genlock, Multi-Camera Setup” on page 156

GEN INDICATOR

The GEN indicator shows the current genlock status.

Grey

: No genlock signal is detected, or the signal cannot cross-lock to project (24.00 FPS vs. 23.98 FPS).

Red

: During process of sync, or genlock is lost while recording.

Green

: A genlock signal matching the current HD-SDI monitor rate is locked.

Yellow

: Timing is cross-locked to compatible but not matching monitor rate. For example, genlock is 24.00

FPS, and HD-SDI monitor rate is 25.00 FPS.

NOTE:

When the GEN indicator is yellow, DO NOT perform 3D operation. This warns that genlock source

settings and camera settings are not aligned, so phasing of the sync between cameras is not guaranteed.

For more information, go to

“Timecode, Genlock, Multi-Camera Setup” on page 156

SYNC INDICATOR

The SYNC indicator shows the current sensor sync status, based on genlock.

Grey

: The sensor sync mode is not set to genlock.

Red

: The sensor sync mode is set to genlock, but is not locked to a genlock signal. This may occur if

genlock or sensor sync is lost while recording.

Green

: The sensor sync mode and HD-SDI monitor rate are locked to a compatible genlock signal.

For more information, go to

“Timecode, Genlock, Multi-Camera Setup” on page 156

LAN INDICATOR

NOTE

: The GIG-E port is only available on the DSMC

REDVOLT Expander. For more information, go to

“Input/

Output Connectors” on page 198

The LAN indicator shows the current status of an external LAN connection through the Gig-E port.

Grey

: External control of the camera is not enabled.

Green

: Ethernet is enabled.

WIFI INDICATOR

The WiFi indicator shows the WiFi status.

Grey

: WiFi is disabled.

Yellow

: WiFi is not connected.

Green

: WiFi is enabled.

For more information, go to

“WiFi” on page 106

Содержание SCARLET-W Series




































































































































































































Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды

RED SCARLET-W Series, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды