RED SCARLET-W Series, Руководство по эксплуатации

Страница: 155 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
COPYRIGHT © 2016 RED.COM, INC 955-0116_V6.1, REV-U | 155
CAMERA DOES NOT RECOGNIZE LENS
SYMPTOM
The camera does not recognize the attached lens.
POTENTIAL RESOLUTIONS
Ensure that the lens is compatible. For more information, go to “Lens Mounts and Lenses” on page 206 .
If using a PL lens, ensure that the camera is providing power to the lens: go to Menu > Settings > Setup >
Lens and select the Enable Power to Lens check box.
Detect the lens: go to Menu > Settings > Setup > Lens and select Detect Lens .
Perform a Hardware Rediscover. For more information, go to “Rediscover (Hardware Rediscover)” on page
120 .
CAMERA DISPLAYS N/A FOR APERTURE
SYMPTOM
The camera displays N/A for aperture when a lens is attached.
POTENTIAL RESOLUTIONS
Ensure that your lens is completely locked in place.
Remove your lens mount. Check the connection points for damage or debris. Install your lens mount.
Perform a Hardware Rediscover. For more information, go to “Rediscover (Hardware Rediscover)” on page
120 .
Re-install your camera firmware.
If your camera is on beta firmware, downgrade to the release build.
If you are using a DSMC PL mount, go to Settings > Setup > Lens and ensure that power is enabled.
NOTE : Some lenses do not display the aperture information because they are incompatible. Some PL lenses do
not have i-technology data.
CANNOT SEE MENUS ON LCD TOUCHSCREEN
SYMPTOM
The LCD touchscreen does not display menus.
POTENTIAL RESOLUTION
Double-tap the LCD touchscreen to exit Clean mode.
SCREEN FREEZES OR DOES NOT DISPLAY
SYMPTOM
The screen freezes or does not display.
POTENTIAL RESOLUTION
Perform a Hard Restore. For more information, go to “Perform a Hard Restore” on page 157 .