background image

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

COPYRIGHT © 2016 RED.COM, INC  

   955-0116_V6.1, REV-U  |   111

CALIBRATE SENSOR: AUTO CAPTURE

The camera offers two (2) ways to calibrate the sensor: Manual Capture and Auto Capture. This section 

describes how to calibrate the sensor with Auto Capture. For more information on Manual Capture, go to 

“Calibrate Sensor: Manual Capture” on page 110

.

When you start an Auto Capture, the camera calibrates the sensor at 16 exposure settings, and uses that data 

to build a calibration curve. Afterward, the sensor is calibrated for each exposure along the calibration curve, 

so you do not need to re-calibrate every time you change the exposure. The calibration process does not factor 

in multiple temperatures, so you will need to re-calibrate the sensor after extreme changes in temperature. This 

process can take up to 40 minutes.
To perform an Auto Capture, follow the instructions below:
1.  Ensure that the camera reaches the temperature you want to use for your shoot.
2.  Ensure that the sensor is as dark as possible.

 

Preferably, take off the lens, and install the front body cap.

 

If you cannot take off the lens, put a lens cap on the lens. (Not all lens caps completely block IR. Lens 

caps are made to protect the lens, not necessarily to block light.)

 

If possible, use a dark room. 

 

Just closing the aperture is NOT sufficient.

3.  Ensure a properly formatted SSD is attached to the camera. 
4.  Go to 

Menu

 > 

Settings

 > 

Maintenance

 > 

Calibrate

 > 

Sensor

 > 

Auto Capture

.

5.  Select 

Start Auto User Black Shade

.

A dialog box displays, reminding you to cover the sensor. 

6.  Select 

OK

 to continue.

The system initializes and then makes multiple passes through the calibration phases.

7.  When the Calibration Successful dialog displays, select 

OK

 to complete black shading.

NOTE

: When you change the exposure setting, the E indicator turns yellow and it may take up to 8 seconds 

for the calibration map to load.

CALIBRATION MAP NAMING CONVENTIONS

Each calibration map has a unique name that uses the format described in the table below:

NAME

DESCRIPTION

EXAMPLE

Exposure

Current exposure; to set exposure, go to 

Menu

 > 

Setting

 > 

Projects

 > 

Exposure

48

Sensor   

Temperature

Sensor temperature (Celsius); in the Lower Status Row, this is the number to the 

left of the forward slash (Temp: 

34

/35)

32C

Year

Year that the calibration map is created (yyyy)

2014

Month

Month that the calibration map is created (mm)

01

Day

Day that the calibration map is created (dd)

28

Time

Time according to the 24-hour clock in the camera (hhmmss)

122150

For example, a sequence of calibration maps may look like this: 
1.  48_32C_20140128122150
2.  72_34C_20140128122858
3.  120_41C_20140128124306

NOTE: 

If you mount an SSD with calibration files to your computer, each calibration map displays as a sub-

folder in a folder called Calibration. To save a calibration map to your hard drive, copy the entire sub-folder (for 

example, 48_32C_20140128122150) to your drive.

Содержание SCARLET-W Series









































































































































































































Отзывы: