RED SCARLET-W Series, Руководство по эксплуатации

Страница: 98 / 200

COPYRIGHT © 2016 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
955-0116_V6.1, REV-U | 98
FRAME PROCESSING
NOTE: Frame processing is not supported in Speed Ramp Mode. For more information, go to “Speed Ramp
Mode” on page 92 .
Frame processing allows for the combination of multiple captured frames into one recorded frame. The
combination occurs before the resulting frame is encoded. You can select the following frame processing
settings: No Frame Processing, Frame Summing, Frame Averaging.
When in Frame Summing mode or Frame Averaging mode, the current integration time is applied to each frame.
This means if the integration time is not the entire frame time (or 360°) there are gaps between the images used
to create the combined frame. This may lead to unexpected motion artifacts.
The effect of frame processing is only visible during record. In Frame Summing mode, this means the exposure
changes between preview and record. Experiment with the exposure and frame processing settings to achieve
the effect you want.
NO FRAME PROCESSING
Normal frame processing mode. The Frames to Process selection does not affect recording.
FRAME SUMMING
Frame Summing combines the specified number of frames into one frame, and adds together the exposure time
for each of the original frames. The resulting frame has an effective integration time that is equal to the current
integration time multiplied by the number of frames.
For example, if you select 16 as the Frames to Process value, and set exposure to 1/48 sec, the resulting image
has an effective integration time of 1/3 sec (16 x 1/48).
Frame summing results in a final image that is brighter and possibly blurrier than any of the original frames, so
you can use frame summing to achieve the effect of long-exposure.
FRAME AVERAGING
Frame Averaging combines the specified number of frames into one frame, and averages the exposure time
for each of the original frames. The resulting frame has an effective integration time that is equal to the current
integration time.
For example, if you select 16 as the Frames to Process value, and set exposure to 1/48 sec, the resulting image
still has the exposure value of 1/48 sec, along with the effect of long-exposure.
You can use frame averaging to achieve the effect of long-exposure along with the benefits of reduced noise.
However, frame averaging does affect motion blur characteristics.
PRE-RECORD
When enabled, the Pre-Record setting continuously captures a cache of footage before recording starts. Select
to have 4–30 seconds (incremented at two second intervals) of pre-record time added to the actual footage.
When Pre-Record is enabled, you will not miss the start of a shot by being a little slow on the trigger.
Pre-Record Duration : Select the pre-record time.
Always trigger Pre-Record before recording : When selected, Pre-Record always starts when recording starts:
A. Press PWR/REC to activate Pre-Record.
B. Press PWR/REC a second time to start recording.
C. Press PWR/REC a third time to stop recording.
Trigger Pre-Record Now : When selected, the Pre-Record menu closes and Pre-Record mode starts.
NOTE : Always perform a Secure Format before using Pre-Record. A Secure Format restores the SSD back to
factory out-of-box settings, and optimizes the SSD for Pre-Record.
NOTE: To use Pre-Record only for specific situations, map Pre-Record to a key ( Menu > Settings > Setup > Keys
> Record: Start Pre-Record ). For more information, go to “Keys” on page 99 .