RED SCARLET-W Series Скачать руководство пользователя страница 157

Страница: 157 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 157

ERROR 0X00000020

SYMPTOM

The display shows a message with the phrase “Error 0x00000020. Please save log and send to RED support.”

POTENTIAL RESOLUTIONS

Perform a secure format of the SSD. For more information, see the

DSMC Media Operation Guide

, available

www.red.com/downloads

Update the camera firmware to the latest release build available for download at

www.red.com/downloads

Submit a Technical Support request at

https://support.red.com

. Include the following with the request:

‒

Log file. For more information, go to

“Save a LOG File” on page 109

‒

List of modules, lens, and third-party accessories that were attached when the error occurred.

‒

Method for powering the camera when the error occurred (include battery types, power modules, and

power cables).

TIGHTEN DC IN CONNECTOR

SYMPTOM

The DC IN connector nut is loose.

POTENTIAL RESOLUTIONS

Tighten the loose DC IN connector nut using a pair of heavy duty strong point tweezers.

WARNING:

DO NOT OVERTIGHTEN.

OPTIONAL:

Add a small amount of Loctite

222 (low strength thread locker) to the threads of the DC IN connector

nut to prevent the connector from becoming loose again.

CAMERA DOES NOT TURN ON

SYMPTOM

The camera does not turn on (does not boot up), even when powered.

POTENTIAL RESOLUTIONS

Remove all accessories and power the camera using the DSMC AC Power Adaptor.

Perform a Hard Restore. For more information, go to

“Perform a Hard Restore” on page 157

Update the camera firmware to the latest release build available for download at

www.red.com/downloads

PERFORM A HARD RESTORE

A common way to resolve camera firmware issues is to perform a Hard Restore. A Hard Restore functions like

a System Restore in that it changes all settings to the factory default values.
To perform a Hard Restore, follow the instructions below:
1. With the camera turned off, hold the

PWR/REC

key on the camera for 20 seconds or until the fans turn at a

high speed.

2. Release the

PWR/REC

key.

The screen displays correctly.

NOTE:

User key settings will be reset as well as any other changes from the default settings.

Содержание SCARLET-W Series




































































































































































































Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды

RED SCARLET-W Series, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-W Series

Отзывы:

Похожие инструкции для SCARLET-W Series

Бренды по названию

Популярные бренды