DSMC2 V-LOCK BATTERY MODULE PRO
Figure: DSMC2 V-Lock Battery Module Pro
The DSMC2 V-Lock Battery Module Pro is a low profile cable-free module that enables you to power your DSMC2
BRAIN and camera accessories using RED BRICK, REDVOLT-V, or other standard V-Lock batteries. The V-Lock
mount and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module offers a P- Tap connector on top and an auxiliary port on the side for powering
peripherals and accessories. Together the P-Tap and auxiliary connectors support a maximum combined current of
3.8 Amps.
This module also offers a DC IN power port that can be used to power the camera system when the module is
attached to the BRAIN. When DC IN power is supplied to the module, and the camera is turned off, this module can
also trickle charge the attached V-Lock battery.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a
lightweight and space-saving form factor. The DSMC2 V-Lock Battery Module Pro is an ideal power solution for use
with most DSMC2 expanders. Alternatively, connect the DSMC2 V-Lock Battery Module Pro directly to your DSMC2
BRAIN for a low-profile, battery-only power configuration.
WARNING:
DO NOT attempt to power a third-party device without first verifying the cabling and connections are
correct, since that may cause damage. Damage to the device, this module, or other components of the camera
system caused by attempting to power a third-party device incorrectly may not be covered under warranty.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
5 5
RED DSMC POWER OPERATION GUIDE
