RED +1 ADAPTOR MODULE Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 94

background image

EPIC/SCARLET ADAPTOR MODULES

This section describes the EPIC/SCARLET adaptor modules.

MODULE ADAPTOR

The Module Adaptor mounts to the back of the EPIC/SCARLET BRAIN and provides power and support for
connected modules. The Module Adaptor includes 1/4-20 mounting holes for customized configuration support. Most
EPIC/SCARLET modules require the use of an adaptor module.

WARNING:

The Module Adaptor is NOT compatible with the +1 Adaptor Module.

+1 ADAPTOR MODULE

Figure: +1 Adaptor Module

The +1 Adaptor Module mounts to the back of the EPIC/SCARLET BRAIN, providing power and support for
connected modules. The +1 Adaptor Module also offers a 4-pin 0B LEMO

®

auxiliary power (DC) port for camera

accessories, and an EVF/LCD port for the use of an additional viewfinder or display.

WARNING:

The +1 Adaptor Module IS NOT compatible with the Module Adaptor.

WARNING:

DO NOT use the EVF/LCD port on the +1 Adaptor Module if a Pro I/O Module is connected to the

EPIC/SCARLET BRAIN. The Pro I/O Module overrides the EVF/LCD and AUX power out ports when connected.

WARNING:

DO NOT attempt to power a third-party device without first verifying the cabling and connections are

correct, since that may cause damage. Damage to the device, this module, or other components of the camera
system caused by attempting to power a third-party device incorrectly may not be covered under warranty.

NOTE:

The +1 Adaptor Module requires that your camera is on firmware v4.0.8 or later.

NOTE:

Use a 4-Pin to 2-Pin Adaptor Cable to support 2-pin camera accessories.

C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC

9 5 5 - 0 0 3 8 , R EV - AD

|

2 6

RED DSMC POWER OPERATION GUIDE

«
...
24
25
26
27
28
...
»

Содержание +1 ADAPTOR MODULE































































































Отзывы:

Нет отзывов

Похожие инструкции для +1 ADAPTOR MODULE

Бренд: GDC Страницы: 64

Бренд: X-pole Страницы: 16

Бренд: Oce Страницы: 255

DWSC - Vintage C

Бренд: Daikin Страницы: 57

Бренд: e-Line Technology Страницы: 36

Бренд: DANA Страницы: 42

Бренд: Yakima Страницы: 8

Бренд: FEIYUTECH Страницы: 19

Electronic Parking Disc II

Бренд: Jacob Jensen Страницы: 28

Бренд: Monacor Страницы: 2

Бренд: kaarta Страницы: 29

Бренд: Safemate Страницы: 12

Бренд: Omnicomm Страницы: 20

Бренд: omnicharge Страницы: 12

Бренд: Hobo Страницы: 7

Бренд: Yolink Страницы: 27

Maintenence Kits

Бренд: Generac Power Systems Страницы: 1

Бренд: pleasant hearth Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды