+1 ADAPTOR MODULE CONNECTIONS
Figure: +1 Adaptor Module
#
CONNECTOR
CONNECTOR TYPE
CONNECTOR FUNCTION
1
Mounting
1/4-20 mounting
Supports bolt-on auxiliary equipment
2
EVF/LCD
1
N/A
Custom digital video and power interconnection between the
camera and RED EVF or LCD; Pinout not published
3
Auxiliary power
out (PWR)
4-pin 0B LEMO
Supplies unregulated (+) 11.5 to 17 VDC battery pass-through;
Connect to 2-pin LEMO accessories with RED 4-Pin to 2-Pin
Adaptor Cable; Max sustained current is 2 A
4
REDMOTE
®
dock
connector
8-point POGO
connector
Power and support for the REDMOTE
5
Dock connector
SEARAY connector
Supports power and communication with modules
1. DO NOT use the EVF/LCD port on the +1 Adaptor Module if a Pro I/O Module is connected to the DSMC BRAIN. The Pro I/O Module overrides
the EVF/LCD and AUX power out ports when connected.
NOTE:
The default auxiliary power output setting is on. Use the on-screen menu to toggle this setting ON/OFF. In the
menu screen, go to:
Power
>
Power Out
>
+1 PWR
. After a camera firmware upgrade or factory reset, the default
auxiliary power output setting is turned on. Thereafter, the last power output setting is restored.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
2 7
RED DSMC POWER OPERATION GUIDE