PRO I/O MODULE
Figure: Module Adaptor and Pro I/O Module
When using a Pro I/O Module along with other EPIC/SCARLET modules, ensure that it is attached closest to the
BRAIN, behind the Module Adaptor or +1 Adaptor Module. This improves access to cables, modules, and batteries,
as well as ensuring proper power distribution.
WARNING:
DO NOT use the EVF/LCD port on the +1 Adaptor Module if a Pro I/O Module is connected to the
DSMC
®
BRAIN. The Pro I/O Module overrides the EVF/LCD and AUX power out ports when connected.
MODULE RESTRICTIONS
There are some restrictions when attaching multiple modules to the EPIC/SCARLET.
DO NOT attach more than four (4) modules to the camera.
DO NOT attach more than one (1) module per type.
DO NOT connect more than one (1) power or battery module to the camera at a time. Backpack modules that
provide power via the 6-pin 1B LEMO
®
power connector on the rear of the BRAIN are an exception.
Follow any other module-specific requirements when attaching modules to the camera.
WARNING:
It is important to read and understand the instructions for a module before you install and use it for the
first time. Failure to comply with instructions may cause irreparable damage to your camera or equipment.
WARNING:
Damage caused by a failure to comply with instructions and warnings is not covered under warranty.
NOTE:
For more information about compatibility and restrictions, contact your Bomb Squad representative.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
9 2
RED DSMC POWER OPERATION GUIDE
