EPIC/SCARLET POWER MODULE OPERATIONS
This section describes the attachment and removal of EPIC/SCARLET modules. These instructions are applicable to
all EPIC/SCARLET modules, except adaptor modules. The Pro Battery Module (Quad) is shown.
WARNING:
DSMC modules attach to an adaptor module. DSMC modules DO NOT attach directly to the BRAIN.
WARNING:
Before installing or removing modules, you MUST turn off the camera.
NOTE:
The REDVOLT XL Module is an exception to the adaptor module requirement. For more information, go to
"Install the REDVOLT XL Module" on page 40
ATTACH A DSMC POWER MODULE
REQUIRED TOOL(S):
T20 TORX driver
1. Turn off the camera.
2. Insert the lip at the top of the module into the recess at the top of the adaptor module.
Figure: Insert Module Lip
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
3 1
RED DSMC POWER OPERATION GUIDE
