RED +1 ADAPTOR MODULE Скачать руководство пользователя страница 40

Страница: 40 / 94

INSTALL THE REDVOLT XL MODULE

The REDVOLT XL Module is designed with a reversible switch plate, enabling direct installation to the EPIC/SCARLET
BRAIN or mounting to other modules.

For more information on installing and removing the REDVOLT XL Module, go to:

"EPIC/SCARLET Adaptor Operations" on page 29

"EPIC/SCARLET Power Module Operations" on page 31

REDVOLT XL MODULE SWITCH PLATE

Figure: REDVOLT XL Module Switch Plate

To configure the switch plate for different mounting variations, follow the instructions below:

1. Loosen the six (6) M3x0.5 x 8 mm screws attaching the SWITCH PLATE evenly using a T10 TORX driver.

2. Remove the six (6) screws. DO NOT discard screws.

3. Install the switch plate to the desired mounting configuration:

4-BOLT-PLATE (Left image)

: Supports attachment directly to the BRAIN.

MODULE PLATE (Right Image):

Supports attachment to DSMC modules.

4. Insert and tighten the six (6) M3x0.5 x 8 mm screws evenly. DO NOT FULLY TIGHTEN.

5. Fully tighten the six (6) M3x0.5 x 8 mm screws evenly. DO NOT exceed 70 in-oz, or damage may occur.

WARNING:

DO NOT OVERTIGHTEN.

For more information, see the

REDVOLT XL Module Installation Video

, availabe at

www.red.com/store/products/redvolt-xl-module.

NOTE:

For more information or replacement screws, please contact your Bomb Squad representative.

C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC

9 5 5 - 0 0 3 8 , R EV - AD

4 0

RED DSMC POWER OPERATION GUIDE

Содержание +1 ADAPTOR MODULE































































































Результаты поиска

Содержание +1 ADAPTOR MODULE

Отзывы:

Похожие инструкции для +1 ADAPTOR MODULE

Бренды по названию

Популярные бренды

RED +1 ADAPTOR MODULE, Руководство по эксплуатации

Результаты поиска

Содержание +1 ADAPTOR MODULE

Отзывы:

Похожие инструкции для +1 ADAPTOR MODULE

Бренды по названию

Популярные бренды