BACKPACK QUICKPLATE (SHORT)
Figure: Backpack Quickplate (Short) and Backpack Base Plate
The Backpack Quickplate and Backpack Quickplate (Short) attach to the Backpack Base Plate to support a RED
BRICK or REDVOLT-V. The Backpack Quickplate provides power to the DC IN rear power connector on the BRAIN
using the attached 6-pin 1B LEMO cable.
The Backpack Base Plate is a receiving platform for power modules like the Backpack Quickplate and Backpack
Quickplate (Short). The Backpack Base Plate attaches to the BRAIN using four (4) screws. A slide- and- lock
mechanism provides easy installation and enables you to adjust the height of a Backpack Quickplate.
WARNING:
DO NOT attempt to power a third-party device without first verifying the cabling and connections are
correct, since that may cause damage. Damage to the device, this module, or other components of the camera
system caused by attempting to power a third-party device incorrectly may not be covered under warranty.
NOTE:
The Backpack Base Plate is required to mount the Backpack Quickplate or Backpack Quickplate (Short).
BACKPACK QUICKPLATE CONNECTORS
The Backpack Quickplate offers one (1) P-Tap connector that provides power (70 W max) for camera accessories.
Figure: Backpack Quickplate P-Tap Connector
2-PIN P-TAP CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
+11.5 to +17 VDC
+11.5 to 17 VDC unregulated battery pass-through power
Out
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 3 8 , R EV - AD
|
4 4
RED DSMC POWER OPERATION GUIDE
