Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO Скачать руководство пользователя страница 109

Страница: 109 / 120

Appendix F. Additional Boot Options

nopass

This command disables the passing of keyboard and mouse information to stage 2 of the instal-

lation program. It can be used to test keyboard and mouse configuration screens during stage 2

of the installation program when performing a network installation.

nopcmcia

This command ignores any PCMCIA controllers in system.

noprobe

This command disables hardware detection and instead prompts the user for hardware informa-

tion.

noshell

This command disables shell access on virtual console 2 during an installation.

nousb

This command disables the loading of USB support during the installation. If the installation

program tends to hang early in the process, this command may be helpful.

nousbstorage

This command disables the loading of the usbstorage module in the installation program’s loader.

It may help with device ordering on SCSI systems.

reboot=b

This x86, AMD64, and Intel® EM64T boot command changes the way the kernel tries to reboot

the machine. If a kernel hang is experienced while the system is shutting down, this command

may cause the system to reboot successfully.

rescue

This command runs rescue mode. Refer to the

Red Hat Enterprise Linux System Administration

Guide

for more information about rescue mode.

resolution=

Tells the installation program which video mode to run. It accepts any standard resolution, such

640x480

800x600

1024x768

, and so on.

serial

This command turns on serial console support.

skipddc

This x86 boot command skips the

ddc

monitor probe which causes problems on some systems.

text

This command disables the graphical installation program and forces the installation program to

run in text mode.

updates

This command prompts you to insert a floppy diskette containing updates (bug fixes). It is not

needed if you are performing a network installation and have already placed the updates image

contents in

RHupdates/

on the server.

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

























































































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды