Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO Скачать руководство пользователя страница 107

Страница: 107 / 120

Appendix F.

Additional Boot Options

This appendix discusses additional boot and kernel boot options available for the Red Hat Enterprise

Linux installation program.
To use any of the boot options presented here, type the command you wish to invoke at the installation

boot:

prompt.

Boot Time Command Arguments

askmethod

This command asks you to select the installation method you would like to use when booting

from the Red Hat Enterprise Linux CD-ROM.

apic

This x86 boot command works around a bug commonly encountered in the Intel 440GX chipset

BIOS and should only be executed with the installation program kernel.

apm=allow_ints

This x86 boot command changes how the suspend service is handled (and may be necessary for

some laptops).

apm=off

This x86 boot command disables APM (Advanced Power Management). It useful because some

BIOSes have buggy power management (APM) and tend to crash.

apm=power_off

This x86 boot command makes Red Hat Enterprise Linux shutdown (power off) the system by

default. It is useful for SMP systems that do not shutdown by default.

apm=realmode_power_off

Some BIOSes crash on x86-based systems when trying to shutdown (power off) the machine.

This command changes the method of how this is done from the Windows NT way to the Win-

dows 95 way.

This argument causes the installation program to prompt you to use a driver diskette.

dd=

url

This argument causes the installation program to prompt you to use a driver image from a speci-

fied HTTP, FTP, or NFS network address.

display=

This command allows remote display forwarding. In this command,

should be replaced with

the IP address of the system on which you want the display to appear.
On the system you want the display to appear on, you must execute the command

xhost

remotehostname

, where

remotehostname

is the name of the host from which you are

running the original display. Using the command

xhost +

remotehostname

limits access

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

























































































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды