Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO Скачать руководство пользователя страница 33

Страница: 33 / 120

Chapter 4. Installing Red Hat Enterprise Linux

NFS

If you are installing from an NFS server using ISO images or a mirror image of Red Hat En-

terprise Linux, you can use this method. You need a boot diskette or a boot CD-ROM (use the

linux askmethod

boot option). You may also need a network driver diskette. A PCMCIA

driver diskette may also be used. Refer to Section 4.8

Installing via NFS

for network installation

instructions. Note that NFS installations may also be performed in GUI mode.

FTP

If you are installing directly from an FTP server, use this method. You need a boot diskette or a

boot CD-ROM (use the

linux askmethod

boot option). You may also need a network driver

diskette. A PCMCIA driver diskette may also be used. Refer to Section 4.9

Installing via FTP

for FTP installation instructions.

HTTP

If you are installing directly from an HTTP (Web) server, use this method. You need a boot

diskette or a boot CD-ROM (use the

linux askmethod

boot option). You may also need a

network driver diskette. A PCMCIA driver diskette may also be used. Refer to Section 4.10

Installing via HTTP

, for HTTP installation instructions.

4.5. Installing from CD-ROM

To install Red Hat Enterprise Linux from a CD-ROM, choose the

CD-ROM

option and select

When prompted, insert the Red Hat Enterprise Linux CD into your CD-ROM drive (if you did not

boot from the CD). Once the CD is in the CD-ROM drive, select

, and press [Enter].

The installation program then probes your system and attempts to identify your CD-ROM drive. It

starts by looking for an IDE (also known as an ATAPI) CD-ROM drive. If found, continue to the next

stage of the installation process (refer to Section 4.12

Language Selection

Note

To abort the installation process at this time, reboot your machine and then eject the boot diskette

or CD-ROM. You can safely cancel the installation at any point before the

About to Install

screen.

Refer to Section 4.25

Preparing to Install

for more information.

If your CD-ROM drive is not detected, and it is a SCSI CD-ROM, the installation program prompts

you to choose a SCSI driver. Choose the driver that most closely resembles your adapter. You may

specify options for the driver if necessary; however, most drivers detect your SCSI adapter automati-

cally.

Tip

A partial list of optional parameters for CD-ROM drives can be found in the

Red Hat Enterprise Linux

Reference Guide

, in the

General Parameters and Modules

appendix.

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

























































































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды