Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO Скачать руководство пользователя страница 25

Страница: 25 / 120

Chapter 4.

Installing Red Hat Enterprise Linux

This chapter explains how to perform a Red Hat Enterprise Linux installation from the CD-ROM,

using the graphical, mouse-based installation program. The following topics are discussed:

•

Becoming familiar with the installation program’s user interface

•

Starting the installation program

•

Selecting an installation method

•

Configuration steps during the installation (language, keyboard, mouse, partitioning, etc.)

•

Finishing the installation

4.1. The Graphical Installation Program User Interface

If you have used a

graphical user interface (GUI)

before, you are already familiar with this process;

use your mouse to navigate the screens, click buttons, or enter text fields. You can also navigate

through the installation using the [Tab] and [Enter] keys.

Note

If you are using an x86, AMD64, or Intel® EM64T system, and you do not wish to use the GUI instal-

lation program, the text mode installation program is also available. To start the text mode installation

program, use the following command at the

boot:

prompt:

linux text

Refer to Section 4.2

The Text Mode Installation Program User Interface

for a brief overview of text

mode installation instructions.
It is highly recommended that installs be performed using the GUI installation program. The GUI

installation program offers the full functunality of the Red Hat Enterprise Linux installation program,

including LVM configuration which is not available during a text mode installation.
Users who must use the text mode installation program can follow the GUI installation instructions

and obtain all needed information.

Note

If you are using an Itanium system, and you do not wish to use the GUI installation program, the

text mode installation program is also available. To start the text mode installation program, type the

following command at the EFI Shell prompt:

elilo linux text

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

























































































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO

Бренды по названию

Популярные бренды