Red Hat ENTERPRISE LINUX 3 - FOR X86-ITANIUMTM-AMD64 AND INTEL EXTENDED MEMORY 64 TECHNOLO, Руководство по установке

Страница: 69 / 120

Chapter 4. Installing Red Hat Enterprise Linux 57
move items down the list by selecting it and pressing the [d] key. After changing the boot order,
choose
Save changes to NVRAM
. Choose
Exit
to return to the Main Menu.
9. Optionally, you can change to boot timeout value by choosing Set Auto Boot TimeOut => Set
Timeout Value
from the Main Menu.
10. Return to the EFI Boot Manager by selecting Exit .
4.30.2.1. Using a Startup Script
It is recommended that you configure the ELILO Boot Manager to boot Red Hat Enterprise Linux
automatically. However, if you require additional commands to be executed before starting the ELILO
boot loader, you can create a startup script named
startup.nsh
. The last command should be
elilo
to boot into Linux.
The
startup.nsh
script should be in the
/boot/efi
partition (
/boot/efi/startup.nsh
) and
contain the following text:
echo -off
your set of commands
elilo
If you want to pass options to the boot loader (refer to Section 4.30.1 Post-Installation Boot Loader
Options ) add them after
elilo
.
You can either create this file after booting into Red Hat Enterprise Linux or use the editor built into the
EFI shell. To use the EFI shell, at the
Shell>
prompt, change devices to the system partition (mounted
as
/boot/efi
in Linux). For example, if
fs0
is the system boot partition, type
fs0:
at the EFI Shell
prompt. Type
ls
to make sure you are in the correct partition. Then type
edit startup.nsh
. Type
the contents of the file and save it.
The next time the system boots, EFI detects the
startup.nsh
file and use it to boot the system. To
stop EFI from loading the file, type [Ctrl]-[c]. This aborts the process, and returns you to the EFI shell
prompt.